Icantek Ip Installer PATCHED

Icantek Ip Installer PATCHED

Download ->->->-> https://blltly.com/2tuVsJ

How to Use Icantek IP Installer for Network Cameras

Icantek IP Installer is a PC program that allows you to configure the network settings of your Icantek network cameras or A/V servers. You can use it to assign IP addresses, change passwords, update firmware, and access the web interface of your devices. In this article, we will show you how to use Icantek IP Installer for network cameras.

Step 1: Download and Install Icantek IP Installer

You can download Icantek IP Installer from the official website of Icantek (www.icantek.com) or from the CD that came with your device. To install it, simply run the setup file and follow the instructions on the screen. You may need to restart your computer after the installation is complete.

Step 2: Connect Your Network Camera to Your PC

Before you can use Icantek IP Installer, you need to connect your network camera to your PC using an Ethernet cable. Make sure that both devices are on the same subnet and that your PC has a valid IP address. You can check your PC's IP address by opening a command prompt and typing ipconfig. If your PC's IP address is 192.168.1.10, for example, then your network camera's IP address should be something like 192.168.1.XX, where XX is any number between 1 and 254.

Step 3: Run Icantek IP Installer and Scan for Devices

Once you have connected your network camera to your PC, you can run Icantek IP Installer from the Start menu or the desktop shortcut. The program will automatically scan for any Icantek devices on your network and display them in a list. You can see the device name, model, MAC address, IP address, firmware version, and web port of each device. You can also select a device and click Properties to see more details.

Step 4: Change the Network Settings of Your Device

If you want to change the network settings of your device, such as the IP address, subnet mask, gateway, DNS server, or web port, you can do so by selecting the device and clicking Modify. A window will pop up where you can enter the new values. Make sure that the new values are compatible with your network and that they do not conflict with other devices. After you have entered the new values, click OK to apply them.

Step 5: Access the Web Interface of Your Device

After you have changed the network settings of your device, you can access its web interface by selecting it and clicking Browse. This will open a web browser and direct you to the device's web page. You may need to enter a username and password to log in. The default username and password are both admin. From the web interface, you can view live video, adjust camera settings, record video, take snapshots, and more.

Conclusion

Icantek IP Installer is a useful tool that helps you set up and manage your Icantek network cameras or A/V servers. You can use it to assign IP addresses, change passwords, update firmware, and access the web interface of your devices. You can also use it to scan for devices on your network and see their information. We hope this article has helped you understand how to use Icantek IP Installer for network cameras. ec8f644aee